BLJTH - LAGGING ADHESIVE & COATING, WHITE 713

  • MSDS: BLJTH
  • Manufacturer: VIMASCO CORP
  • Product Name: LAGGING ADHESIVE & COATING, WHITE 713
  • National Stock Number: 8040-00-273-8708
Product Identification

Product ID:LAGGING ADHESIVE & COATING, WHITE 713
MSDS Date:11/06/1990
FSC:8040
NIIN:00-273-8708
MSDS Number: BLJTH

Responsible Party
VIMASCO CORPORATION
NITRO, WV 25143
US

Emergency Phone: 304-755-3328

Info Phone: 304-755-3328

Preparer: JOHN TIDQUIST

Cage: DO737

Contractor
VIMASCO CORPORATION
516 NITRO, WV 25143 US

Telephone: 304-755-3328

Cage: DO737

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <2%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CHLORINATED PARAFFIN

CAS: 63449-39-8

RTECS: RV0480000

Fraction By Weight: < 10%


VINYLACETATE-DIBUTYLMALEATE

CAS: 25035-90-9

Fraction By Weight: 10-15%


HEXYLENE GLYCOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: 0.5%

OSHA PEL C 25 PPM

ACGIH TLV: C 25 PPM; 9192

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAN CAUSE SKIN & EYE IRRITATION. EYE:
TEARING, STINGING, REDNESS. INHALE: NASAL & RESPIRATORY IRRITATION.
COUGHING, SORENESS IN RESPIRATORY TRACT, CHEST TIGHTNESS, DIFFICULT
BREATHING. MUCOUS MEMBRANE IRRITATION. INGEST: CAN CAUSE
DRUNKENNESS, RAPIDLY PASSING TO COMA, WITH SERIOUS KIDNEY INJURY
&/OR DEATH. NARCOSIS.
Explanation of Carcinogenicity:VINYL ACETATE HAS BEEN REPORTED TO CAUSE
CANCER IN LABORATORY ANIMALS.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING LUNG
DISORDERS MAY BE MORE SUSCEPTIBLE.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH CLEAN WATER
AT LEAST 15 MINUTES. IF IRRITATION PERSISTS CONSULT PHYSICIAN.
INHALE: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER
OXYGEN. I F IRRITATION PERSISTS, CONSULT PHYSICIAN. INGEST: GIVE
TWO GLASSES OF WATER, INDUCE VOMITING, CONSULT PHYSICIAN OR POISON
CONTROL CENTER. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS
PERSON.

Fire Fighting

Flash Point Method:TCC
Flash Point:NONE
Lower Limits:NA
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:PRODUCT WILL NOT BURN UNTIL AFTER WATER HAS
BOILED OR EVAPORATED. FOR DRIED FILM OR RESIDUAL SOLIDS, FULL
PROTECTION EQUIPMENT IS RECOMMENDED, INCLUDING SCBA.
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:VENTILATE AREA. CONTAIN & ABSORB LIQUID W/
INERT MATERIALS SUCH AS SAND. SHOVEL INTO CONTAINERS. PREVENT
PRODUCT FROM ENTERING STREAMS OR DRINKING WATER SUPPLIES. BEFORE
DRYING, PRODUCT MAY BE WASHED AWAY W/WATER. AFTER DRY USE PAINT
SCRAPER/SOLVENT.

Handling

Handling and Storage Precautions:AVOID BREATHING VAPORS & APPLICATION
TO HOT SURFACES-VAPORS MAY BE IRRITATING. KEEP CONTAINER CLOSED.
USE W/ADEQUATE VENTIL. STORE INDOORS AT 45-90F.
Other Precautions:FOR INDUSTRY/PROFESSIONAL USE ONLY. NOT INTENDED FOR
RETAIL SALE OR USE BY INDIVIDUAL CONSUMERS. DO NOT REUSE CONTAINER
FOR POTABLES OR EDIBLES.

Exposure Controls

Respiratory Protection:RESTRICTED AREAS:USE APPROVED CHEMICAL VAPOR
RESPIRATOR. IN APPLICATION WHERE MIST/SPRAY MAY BE GENERATED, AVOID
INHALATION OF AIRBORNE PARTICULATES BY USING AN APPROVED RESPIRATOR
W/ ORGANIC VAPOR CA RTRIDGE W/PREFILTER FOR MIST OR DUST.
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION WITH LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:GOGGLES, FACESHIELD, SPLASH PROTECTION
Work Hygienic Practices:THOROUGHLY CLEANSE HANDS AFTER HANDLING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:25.0F,-3.9C
Decomp Temp:Decomp Text:240F,116C
Vapor Density:< THAN AIR
Spec Gravity:1.29
pH:8-9
Viscosity:75,000 CPS
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:VISCOUS, WHITE PASTE WITH MILD LATEX ODOR
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
MATERIALS INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL YIELD CO,
CO2, HCL, ANTIMONY-OXYCHLORIDE AND FRAGMENTED SHORT-CHAIN
HYDROCARBONS.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
REVIEW HAZARD SECTION OF THIS SHEET BEFORE ATTEMPTING CLEANUP.
EMPTY CONTAINERS ARE NONHAZARDOUS UNDER RCRA AS INDUSTRIAL WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.